Reference Guide

Brocade Fabric OS Command Reference 567
53-1004112-02
nsCamShow
Notes
The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric
OS Commands" and "Command Availability" for details.
Operands The following operand is optional:
-t
Displays the device type. The device type is defined in terms of two attributes. The first
attribute indicates the origination of the device as one of the following:
Physical
The device is connected to the NX_Port, using FLOGI to log in to the switch.
Virtual
The device is contrived by the switch.
NPV
The device is connected to the NX_Port, using FDISC to log in to the switch.
iSCSI
Device is connected to the iSCSI port.
iSCSI
The second attribute indicates the role of the device. Valid role attributes include the
following:
Unknown (initiator/target)
Device role is not detected
Initiator
An iSCSI initiator.
Target
An iSCSI target.
Initiator+Target
Both an iSCSI initiator and an iSCSI target.
Examples To display all switch and device entries discovered by the Name Server in the fabric:
switch:user> nscamshow
nscam show for remote switches:
Switch entry for 92
state rev owner cap_available
known v640 0xfffc23 1
Device list: count 8
Type Pid COS PortName NodeName
N 5c1000; 3;23:06:00:05:1e:53:e3:8a;50:00:51:e5:3e:38:a0:06;
FC4s: FCP
PortSymb: [45] "Brocade VDPC Entity-Slot#00,DPC#00,Entity#03."
Fabric Port Name: 20:10:00:05:1e:53:e3:8a
Permanent Port Name: 23:06:00:05:1e:53:e3:8a
Port Index: 16
Share Area: No
Device Shared in Other AD: No
Redirect: No
Partial: No
N 5c1200;3;23:04:00:05:1e:53:e3:8a;50:00:51:e5:3e:38:a0:04;
FC4s: FCP