Reference Guide

36 Brocade Fabric OS Command Reference
53-1004112-02
ag
AG port mapping commands
To display current port mappings and port grouping policies:
switch:admin> ag --mapshow
N_Port Configured Static Current Failover Failback PG_ID PG_Name
_F_Ports _F_Ports _F_Ports
-----------------------------------------------------------------
0 4;5;6 None 4;5;6 1 0 2 SecondFabric
1 7;8;9 None 7;8;9 0 1 0 pg0
2 10;11 None 10;11 1 0 2 SecondFabric
3 12;13 None 12;13 0 1 0 pg0
------------------------------------------------------------------
Explanation of fields in --mapshow output:
• Static F_Ports are part of static F_Port to N_Port mapping.
• Current F_Ports are the F_Ports that are currently online and mapped to a given N_Port either because they
are mapped to that N_Port or as a result of N_Port failover.
• Configured F_Ports are the F_Ports that are explicitly mapped to this N_Port (saved in config).
• Failover and Failback indicate whether or not N_Port policy is enabled (1) or disabled (0).
• PG_ID is the Port Group ID and PG_Name is the Port Group Name.
To clear all F_Ports mapped to the configured primary N_Port 0:
switch:admin> ag --mapset 0 ""
F_Port to N_Port mapping has been updated successfully
To add F_Ports 4 and 6 to N_Port 0 (observe that Port 0 has no configured F_Ports):
switch:admin> ag --mapset 0 "4;6"
F_Port to N_Port mapping has been updated successfully
To add F_Port 5 to N_Port 2 (observe that N_Port 2 already has mapped F_Ports):
switch:admin> ag --mapadd 2 "5"
To display the new mappings:
switch:admin> ag --mapshow
N_Port Configured Static Current Failover Failback PG_ID PG_Name
_F_Ports _F_Ports F_Ports
-----------------------------------------------------------------
0 4;6 None 4;6 1 0 2 SecondFabric
1 7;8;9 None 7;8;9 0 1 0 pg0
2 5;10;11 None 5;10;11 1 0 2 SecondFabric
3 12;13 None 12;13 0 1 0 pg0
------------------------------------------------------------------