Reference Guide
Brocade Fabric OS Command Reference 601
53-1004112-02
pathInfo
Examples
To display basic path information to a specific domain in command line mode:
switch:admin> pathinfo 91
Target port is Embedded
Hop In Port Domain ID (Name) Out Port BW Cost
---------------------------------------------------------
0 E 9 (web226) 2 1G 1000
1 3 10 (web229) 8 1G 1000
2 8 8 (web228) 9 1G 1000
3 6 91 (web225) E - -
To display basic path information in traceroute format:
switch:admin> pathinfo 91 -t
traceroute to domain 91(web225) , 25 hops
Hop Domain ID (Name) time taken for the hop
-----------------------------------------------
1 10 (web229) 0.0331 us
To display basic path information in traceroute format with reverse path option:
switch:admin> pathinfo 4 -r -t
Target port is Embedded
Hop Domain ID (Name) Time/hop
----------------------------------------------------
1 11 (mps_daz_1) 32882 usec
2 4 (METEOR) 32882 usec
3 11 (mps_daz_1) 32882 usec
4 97 (pulsar055) 32882 usec
To display path information when source port and destination port are provided along with the traceroute option:
switch:admin> pathinfo 6 12 13 -t
Target port is F_Port
Hop Domain ID (Name) Time/hop
-----------------------------------------------
6 (Stealth_I) 108186 usec
To display basic path information to a specific domain in a Virtual Fabric environment (the cost for this hop is the
cost of the corresponding path in the base fabric):
switch:admin> pathinfo 13 4
Target port is Embedded
Hop In Port Domain ID (Name) Out Port BW Cost
---------------------------------------------------------
0 4 9 2009* - 1500
1 2015* 10 8 1G 1000
2 6 13 E - -