Reference Guide

Brocade Fabric OS Command Reference 617
53-1004112-02
portCamShow
port
Specifies the port number to display, relative to its slot for bladed systems. Use switchShow
to list valid ports. This operand is required.
Examples To display the filter CAM utilization for a single port on a switch:
switch:user> portcamshow 3/2
--------------------------------------------------
Area SID used DID used SID entries DID entries
34 3 1 350400 2b2200
2b1200
220400
--------------------------------------------------
SID Free, DID Free: (61, 511)
To display port CAM entries on shared ports (in the example, port 7/31 and 7/39 are shared ports and 7/31 is the
primary port):
switch:user> portcamshow 7/39
--------------------------------------------------
Area SID used DID used SID entries DID entries
207 3 1 03b380 03cf80
034100
03cf00
--------------------------------------------------
SID free, DID free: (2044, 1020)
switch:admin> portcamshow 7/31
--------------------------------------------------
Area SID used DID used SID entries DID entries
207 4 2 03b380 03cf80
034100 03cf00
03cf00
03cf80
--------------------------------------------------
SID free, DID free: (2044, 1020)
The SID entry 03cf00 and DID entry 03cf80 on port 7/31 belong to port 7/39.
SEE ALSO switchShow