Reference Guide

648 Brocade Fabric OS Command Reference
53-1004112-02
portCfg
operation will bring the existing circuit down
(if circuit is up) before applying new configuration.
Continue with Modification (Y,y,N,n): [n] y
Operation Succeeded
4. Modify existing circuit to change DSCP marking values
switch:admin> portcfg fcipcircuit 16 modify 0 \
--dscp-f 32 --dscp-h 16 --dscp-m 8 --dscp-l 4
Operation Succeeded
5. Display the tunnel configuration and circuit values.
switch:admin> portshow fciptunnel 24 -c
-------------------------------------------
Tunnel: VE-Port:24 (idx:0, DP0)
====================================================
Oper State : Online
TID : 24
Flags : 0x00000000
IP-Extension : Disabled
Compression : None
QoS BW Ratio : 50% / 30% / 20%
Fastwrite : Disabled
Tape Pipelining : Disabled
IPSec : Enabled
IPSec-Policy : myPolicy1
Load-Level (Cfg/Peer): Failover (Failover / Failover)
Local WWN : 10:00:00:05:33:65:82:c8
Peer WWN : 10:00:00:05:33:65:84:08
RemWWN (config) : 00:00:00:00:00:00:00:00
cfgmask : 0x0000001f 0x4000020c
Flow Status : 0
ConCount/Duration : 2 / 2h41s
Uptime : 1h31m59s
Stats Duration : 1h31m59s
Receiver Stats : 1020072 bytes / 6534 pkts / 210.00 Bps Avg
Sender Stats : 835204 bytes / 6535 pkts / 173.00 Bps Avg
TCP Bytes In/Out : 28609996 / 35324148
ReTx/OOO/SloSt/DupAck: 0 / 0 / 0 / 0
RTT (min/avg/max) : 1 / 1 / 1 ms
Wan Util : 0.0%
TxQ Util : 0.0%
Circuit 24.0 (DP0)
====================================================
Admin/Oper State : Enabled / Online
Flags : 0x00000000
IP Addr (L/R) : 10.1.8.77 ge8 <-> 10.1.8.76
HA IP Addr (L/R) : 0.0.0.0 ge0 <-> 0.0.0.0
Configured Comm Rates: 1000000 / 1000000 kbps
Peer Comm Rates : 1000000 / 1000000 kbps
Actual Comm Rates : 1000000 / 1000000 kbps
Keepalive (Cfg/Peer) : 6000 (6000 / 6000) ms
Metric : 0
Connection Type : Default
ARL-Type : Auto
PMTU : Disabled
SLA : (none)