Reference Guide

650 Brocade Fabric OS Command Reference
53-1004112-02
portCfg
To modify an existing circuit so it becomes the listener:
switch:admin> portcfg fcipcircuit 16 modify 2 -C 1
!!!! WARNING !!!!
Modify operation can disrupt the traffic on the fcipcircuit specified \
for a brief period of time. This operation will bring the existing \
circuit down (if circuit is up) before applying new configuration.
Continue with Modification (Y,y,N,n): [n]y
Operation Succeeded
To modify an existing circuit so it becomes the initiator (the following example uses the string option):
switch:admin> portcfg fcipcircuit 16 \
modify 2 --connection-type initiator
!!!! WARNING !!!!
Modify operation can disrupt the traffic on the fcipcircuit specified \
for a brief period of time. This operation will bring the existing \
circuit down (if circuit is up) before applying new configuration.
Continue with Modification (Y,y,N,n): [n]y
Operation Succeeded
To configure an IPSec-enabled tunnel to connect with an IPSec-configured tunnel in legacy mode:
switch:admin> portcfg fciptunnel 8/12 modify --legacy enable
!!!! WARNING !!!!
Modify operation can disrupt the traffic on the fciptunnel specified \
for a brief period of time. This operation will bring the existing \
tunnel down (if tunnel is up) before applying new configuration.\
Continue with Modification (Y,y,N,n): [n]y
Tunnel 8/12 modify: Operation Succeeded
SEE ALSO configure, portCfgGE, portCfgShow, portCmd, portShow, switchShow