Reference Guide

Brocade Fabric OS Command Reference 653
53-1004112-02
portCfgAutoDisable
port[-port]
Specifies a port or a port range, relative to the slot number on bladed systems, for example,
5/17-29.
--enable
Enables the autodisable feature on the specified ports.
--disable
Disables the autodisable feature on the specified ports.
--add
Specifies one or more trigger conditions that will disable the specified ports. Trigger
conditions must be separated by a space, for example, LOSN OLS LIP. Trigger conditions
are case insensitive.
--remove
Removes one or more trigger conditions from the port autodisable configuration.
--addall
Adds all supported trigger conditions to the port autodisable configuration.
--removeall
Removes all supported trigger conditions from the port autodisable configuration. This
command removes the triggers only; it does not disable the port autodisable flag.
--addexcept
Adds all supported trigger conditions to the port autodisable configuration except the one
specified .
--show
Displays the port autodisable configuration.
--suspend
Suspends the current port autodisable configuration temporarily.
--resume
Resumes the suspended port autodisable configuration.
--help
Displays command usage.
option
Specify one or more the following options (supported with the --add, --remove, and
--addexcept operands):
LOSN
Loss of Sync
LOSNG
Loss of Signal
OLS
Offline Primitive Sequence
NOS
Not Operational Primitive Sequence