Reference Guide

48 Brocade Fabric OS Command Reference
53-1004112-02
agShow
agShow
Displays the Access Gateway information registered with the fabric.
Synopsis agshow
agshow --name ag_name
agshow --local
Description This command displays the details of the F_Ports and the configured N_Ports in the Access Gateway attached to
the fabric. The command output displays the following information.
Name
The name of the Access Gateway.
NodeName
The World Wide Name of the Access Gateway node.
Ports
The number of ports in the Access Gateway.
Enet IP Addr
The IP address of the Access Gateway.
Firmware
Current firmware running on the Access Gateway.
Local/Remote
Indicates whether the Access Gateway is locally or remotely registered to this switch.
World Wide Name
The world wide name (WWN) of the given Access Gateway.
N-Port ID(s)
The port ids of the N_Ports configured in the given Access Gateway.
N-Ports
The number of configured N_Ports that are online.
F-Ports
The number of F_Ports that are online.
Attached F-Port information
Displays the Port ID, the switch F-port number, and the Port WWN of each F_Port that is
online on the Access Gateway.
Access Gateway F-Port information
Displays the port number, the port ID, and the Port WWN of the Access Gateway to which
the F_Port is connected. This information is displayed only if both the Access Gateway and
the switch to which the Access Gateway is attached are running Fabric OS v.7.0.0 or later.
The data in this section is not always synchronized with the data in the Attached F-Port
information section.