Reference Guide

Brocade Fabric OS Command Reference 715
53-1004112-02
portCfgPersistence
port1[-port2]
Sets the flag for a single port or a range of ports identified by port numbers. The port range
cannot span slots, but you can specify multiple port range pairs separated by a space, for
example 3/1-4 4/7-9.
-f
Ignores nonexisting ports.
-i index1[-index2]
Sets the flag for a port or a range of ports identified by port index numbers. You can specify
multiple index ranges separated by a space, for example, -i 33-38 40-60.
-x index1[-index2]
Sets the flag for a port or a range of ports identified by index number in hexadecimal format.
You can specify multiple port ranges separated by a space, for example, -x 21-26 28-3c.
-slot [slot1[-slot2]
Sets the flag on all ports on a slot or on a range of slots, for example, -s 3-5. You can
specify multiple slot ranges separated by a space, for example, -s 3-5 8-10.
-h
Displays the command usage.
Examples To set the persistentenable flag on a port:
switch:admin> portcfgpersistence --set -pe 2
To set the persistentdisable flag on a port:
switch:admin> portcfgpersistence --set -pd 0
SEE ALSO ficonCupSet, ficonCupShow, portCfgDefault, portDisable, portEnable, portCfgPersistentDisable,
portCfgPersistentEnable, portShow, portSwapDisable, portSwapShow, switchShow