Reference Guide

Brocade Fabric OS Command Reference 727
53-1004112-02
portCfgShow
AL_PA Offset 13
Displays (..) or OFF when the arbitrated loop physical address (AL_PA) on the port is
configured to use a 0x0 AL_PA address (default). Displays ON when the address
configuration is 0x13 AL_PA. This value is set by the portCfgAlpa command.
Trunk Port
Displays ON when port is set for trunking. Displays (..) or OFF when trunking is disabled on
the port. This value is set by the portCfgTrunkPort command.
Long Distance
Displays (..) or OFF when long distance mode is off; otherwise, displays long distance levels.
This value is set by the portCfgLongDistance command. Values are as follows:
LE
The link is up to 10 km.
LD
The distance is determined dynamically.
LS
The distance is determined statically by user input.
VC Link Init
Displays (..) or OFF when the long distance link initialization option is turned off. Displays
ON when it is turned on for long distance mode. This value is set by the
portCfgLongDistance command.
Desired Distance
Displays the desired distance of the port. This field is displayed only when portCfgShow is
executed for a single port and would only display for LS and LD long distance mode.
Reserved Buffers
Displays the reserved buffers for the port. This field is displayed only when portCfgShow is
executed for a single port and would only display for LS and LD long distance mode.
Locked L_Port
Displays ON when the port is locked to L_Port only. Displays (..) or OFF when L_Port lock
mode is disabled and the port behaves as a U_Port). This value is set by the portCfgLport
command.
Locked G_Port
Displays ON when the port is locked to G_Port only. Displays (..) or OFF when G_Port lock
mode is disabled and the port behaves as a U_Port. This value is set by the portCfgGport
command.
Disabled E_Port
Displays ON when the port is not allowed to be an E_Port. Displays (..) or OFF when the
port is allowed to function as an E_Port. This value is set by the portCfgEport command.
ISL R_RDY Mode
Displays ON when ISL R_RDY mode is enabled on the port. Displays (..) or OFF when ISL
R_RDY mode is disabled. This value is set by the portCfgISLMode command.