Reference Guide
728 Brocade Fabric OS Command Reference
53-1004112-02
portCfgShow
RSCN Suppressed
Displays ON when RSCN suppression is enabled on the port. Displays (..) or OFF when
RSCN suppression is disabled. This value is set by the portCfg rscnsupr command.
Persistent Disable
Displays ON when the port is persistently disabled; otherwise displays (..) or OFF. This value
is set by the portCfgPersistentDisable command.
LOS TOV mode
Displays 1 (ON:FixSpd) or 2 (ON:AN&FixSpd) when LOS TOV is enabled on the port;
otherwise displays (..) or 0 (OFF). This value is set by the portCfgLossTov command.
NPIV capability
Displays ON when N_Port ID Virtualization (NPIV) is enabled on the port (default). Displays
(..) or OFF when NPIV capability is disabled. This value is set by the portCfgNPIVPort
command.
NPIV PP Limit
Displays the maximum number of allowed logins for the port. Displays the default of 126 or
the configured maximum. This parameter is set with the portCfgNPIVPort --setloginlimit
command.
NPIV FLOGI Logout
Displays ON when the Base Device Logout feature is enabled and the base device can
logout without disrupting the NPIV devices on the same port. Displays (..) when the base
device log out causes the NPIV devices on the same port to log out.
QOS E_Port
Displays ON when Quality of Service (QoS) is enabled on the E_Port (or EX_Port) when
QoS is enabled in an FCR deployment scenario. Displays (..) or OFF when QoS is disabled.
By default, QoS is enabled if sufficient buffers are available. Displays AE when QoS is
configured as Auto Enabled. In the AE state, QoS is enabled based on the availability of
buffers.
Use islShow to determine the current status of QoS (on or off) in the AE state. This value is
set by the portCfgQos command.
EX_Port
Displays ON when the port is configured as an EX_Port. Otherwise displays (..) or OFF. This
value is set by the portCfgExPort command.
Mirror Port
Displays ON when Mirror Port is enabled on the port. Displays (..) or OFF when Mirror Port
is disabled. This value is set by the portCfg mirrorport command.
SIM Port
Displays ON when SIM Port is enabled on the port. Displays (..) or OFF when SIM Port is
disabled. This value is set by the flow --control flow_name -simport command.
FC Fastwrite
Displays ON when FC FastWrite is enabled on the port or (..) or OFF when disabled.
FastWrite is disabled by default. This value is set by the portCfg fastwrite FC Fastwrite is no
longer supported as of Fabric OS v7.0.0.