Reference Guide

732 Brocade Fabric OS Command Reference
53-1004112-02
portCfgShow
ve_port
Displays information for the specified FCIP tunnel. To display the tunnel, specify the
VE_Port number associated with the tunnel configured on one of the GbE ports. VE_Ports
are numbered 16-23.
optional_argument
The following optional argument is supported with fciptunnel:
-ipsec
Displays whether IPSec is enabled or disabled. If enabled, the key is displayed. If IPSec
is enabled and configured in legacy mode, the mode is displayed as "legacy". The
mode information is displayed whether or not you issue the -ipsec option.
ipsec-policy
Displays the IPsec policy. This option is supported on the Brocade 7840 switch only.
lag
Displays the static link aggregation group (LAG) information.
tcl
Displays the Traffic Control List (TCL) information.
sla
Displays the Service Level Agreement (SLA) information.
Examples To display the port configuration settings for a single port on a Brocade DCX 8510-8:
switch:admin> portcfgshow 10/38
Area Number: 222
Octet Speed Combo: 1(16G|8G|4G|2G)
Speed Level: AUTO(HW)
AL_PA Offset 13: OFF
Trunk Port ON
Long Distance LS
VC Link Init OFF
Desired Distance 10 Km
Reserved Buffers 86
Locked L_Port OFF
Locked G_Port OFF
Disabled E_Port OFF
Locked E_Port OFF
ISL R_RDY Mode OFF
RSCN Suppressed OFF
Persistent Disable OFF
LOS TOV mode 2(ON:AN&FixSpd)
NPIV capability ON
NPIV FLOGI Logout ON
QOS E_Port AE
Port Auto Disable: ON LOSG OLS NOS LIP
Rate Limit OFF
EX Port OFF
Mirror Port OFF
SIM Port ON
Credit Recovery ON
F_Port Buffers OFF
E_Port Credits OFF
Fault Delay: 0(R_A_TOV)
NPIV PP Limit: 126