Reference Guide

Brocade Fabric OS Command Reference 741
53-1004112-02
portCfgSpeed
-m
Sets auto-negotiation maximum speed. This operand is optional. Valid values are one of the
following.
2
Sets the maximum auto-negotiation speed to 2 Gbps (not supported on 32G platforms).
4
Sets the maximum auto-negotiation speed to 4 Gbps.
8
Sets the maximum auto-negotiation speed to 8 Gbps.
16
Sets the maximum auto-negotiation speed to 16 Gbps.
32
Sets the maximum auto-negotiation speed to 32 Gbps.
-h
Displays the command usage.
Examples To set the speed of a port to 10 Gbps:
switch:admin> portcfgspeed 2/3 10
To set the speed of a port using the port index:
switch:admin> portcfgspeed -i 78 16
To set the speed of a port range using the port index:
switch:admin> portcfgspeed -i 24-38 8
To set all ports on slots 2 and 3 to 8 Gbps:
switch:admin> portcfgspeed -s 2-3 8
To set all ports on slots 2-3 and 9-12 to 10 Gbps:
switch:admin> portcfgspeed -s 2-3 9-12 10
To set the speed of all ports in a range:
switch:admin> portcfgspeed -x 1d-1e 8
To set the maximum auto-negotiation speed:
switch:admin> portcfgspeed 17 0 -m 4
SEE ALSO portCfgOctetSpeedCombo, portCfgShow, portShow, switchCfgSpeed, portSwapDisable, switchCfgSpeed,
portSwapShow, switchShow