Reference Guide

762 Brocade Fabric OS Command Reference

53-1004112-02

portDebug

Sets debug level and verbose level of port modules.

Synopsis portdebug dbg_lvl, vbs_lvl

Description Use this command to set the debug level and verbose level of port modules.

Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric

OS Commands" and "Command Availability" for details.

Operands This command has the following operands:

dbg_lvl

Specify the debug level to be set for port modules; valid values are 1 to 5.

vbs_lvl

Specify the verbose level to be set for port modules; valid values are 1 to 5.

Examples To set debug level and verbose level of port modules:

switch:admin> portdebug 3 4