Reference Guide

772 Brocade Fabric OS Command Reference
53-1004112-02
portDPortTest
To set OWRAP on a port:
switch:admin> portdporttest --set owrap 10/32
To clear both EWRAP and OWRAP on a port:
switch:admin> portdporttest --clear all 10/32
To display the D_Port test results for a port while the test is in progress or after the test has completed:
switch:admin> portdporttest --show 16
D-Port Information:
===================
Port: 16
Remote WWNN: 10:00:00:27:f8:f0:21:60
Remote port index: 8
Mode: Manual
No. of test frames: 1 Million
Test frame size: 1024 Bytes
FEC (enabled/option/active): Yes/No/Yes
CR (enabled/option/active): Yes/No/No
Start time: Sun Sep 27 17:15:09 2015
End time: Sun Sep 27 17:15:27 2015
Status: PASSED
=======================================================================
Test Start time Result EST(HH:MM:SS) Comments
=======================================================================
Electrical loopback 17:15:11 PASSED -------- ----------
Optical loopback 17:15:18 PASSED -------- ----------
Link traffic test 17:15:23 PASSED -------- ----------
=======================================================================
Roundtrip link latency: 1061 nano-seconds
Estimated cable distance: 1 meters
Buffers required: 1 (for 2112 byte frames at 32Gbps speed)
Egress power: Tx: -1.0 dBm, Rx: -0.9 dBm, Diff: 0.0 dBm (No Loss)
Ingress power: Rx: -1.3 dBm, Tx: -1.4 dBm, Diff: 0.0 dBm (No Loss)
To display D_Port summary information:
switch:admin> portdporttest --show all
Port State SFP Capabilities Test Result
=============================================
24 ONLINE E,O PASSED
26 ONLINE E,O PASSED
33 OFFLINE --- FAILED
To display the D_Port test results for a port when the test has failed:
switch:admin> portdporttest --show 3/20
D_Port Information:
===================
Slot: 3
Port: 20
Remote WWNN: 10:00:00:05:33:7e:69:c4
Remote port index: 28
Mode: Manual
No. of test frames: 1 Million
Test frame size: 1024 Bytes
FEC (enabled/option/active): Yes/No/No