Reference Guide

782 Brocade Fabric OS Command Reference
53-1004112-02
portErrShow
-x [hex1 [-hex2]]
Displays port error summary for a port or a range of ports identified by port index numbers
in hexadecimal format. You may specify port ranges separated by "-", for example, -x
21-26.
--help
Displays the command usage.
Examples To display error counters for ports on a switch:
switch:admin> porterrshow
frames enc crc crc too too bad enc \
tx rx in err g_eof shrt long eof out
============================================================= \
0: 0 0 0 0 0 0 0 0 0 \
1: 2.5g 73m 0 0 0 0 0 0 1.2k \
2: 0 0 0 0 0 0 0 0 0 \
3: 0 0 0 0 0 0 0 0 667 \
disc link loss loss frjt fbsy c3-timeout pcs
c3 fail sync sig tx rx err
=============================================================
0 0 2 4 0 0 0 0 0
563.2k 0 0 0 1 0 0 415.2k 0
0 0 0 1 0 0 0 0 0
0 21 4 8 0 0 0 0 0
(output truncated)
SEE ALSO portShow, portStatsShow