Reference Guide

Brocade Fabric OS Command Reference 797

53-1004112-02

portLogPdisc

Sets or clears the debug_pdisc_flag.

Synopsis portlogpdisc 0 | 1

Description Use this command to set or clear the debug_pdisc_flag. This command is part of the environmental monitor. A

setting of 1 enables logging of Port Discovery parameters. The PDISC log is disabled by default.

Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric

OS Commands" and "Command Availability" for details.

Operands This command has the following operand:

0 |1

Specify 0 to clear or 1 to set the debug_pdisc_flag. The default is 0.

Examples To set the debug_pdisc_flag:

switch:admin> portlogpdisc 1

PDISC log setting = 1