Reference Guide

Brocade Fabric OS Command Reference 813

53-1004112-02

portLoopbackTest

-uports itemlist

Specifies a list of user ports to test. If this operand is omitted, by default the test will run on

all valid blade ports in the slot. Refer to itemList for more information on the itemlist

parameter. This option is only available for 16 Gbps-capable and 32 Gbps-capable blades.

Diagnostics When it detects failures, the test may report one or more of the following error messages. If errors persist, contact

Technical Support.

DATA

Data received does not match the data sent.

ERRSTAT

Errors were found in the ASIC statistics.

INIT

Port failed to initialize.

PORTDIED

A previously initialized port went to an uninitialized state.

STATS

Errors were found in the ASIC statistics.

TIMEOUT

Did not receive a frame in the given timeout period.

XMIT

Frame transmission failure.

Examples To run a functional test in default mode:

switch:admin> portloopbacktest

Running portloopbacktest ..............

PASSED.