Reference Guide

Brocade Fabric OS Command Reference 831
53-1004112-02
portShow
BB XLate
Information on the xlate (translate) phantom domain presented at this port. Includes the
preferred (if not active) or actual (if active) domain ID for the xlate phantom domain and the
WWN of the xlate phantom domain. The xlate phantom domain connected at this port is in
the same fabric as the router and represents the edge fabric connected to the EX_Port.
Authentication Type
Displays NONE or DH-CHAP. DH-CHAP is the only authentication type supported on
EX_Ports.
DH Group
Displays DH group [0-4] if DH-CHAP authentication is used. Otherwise displays N/A.
Hash Algorithm
Displays hash type (MD5 or SHA-1) if DH-CHAP authentication is used. Otherwise,
displays N/A.
Edge fabric's primary WWN
If the EX_Port is connected to an edge switch with FCS policy enforcement, the WWN of
the primary FCS is displayed when the edge fabric is secure and the primary FCS is online.
Otherwise, displays "No Primary".
Edge fabric's version stamp
If the EX_PORT is connected to an edge switch with FCS policy enforcement, the version
of the security database is displayed. Otherwise displays N/A.
The portShow command displays FCoE ports with "Protocol: FCoE" and "portSpeed: 10Gbps". Only a subset of
information is displayed. Refer to the Examples section for an illustration. Use fcoe --cfgshow and fcoe
--loginshow to display FCoE-specific configuration details.
Following the general information, the command displays three columns of counters. The first column shows
interrupt statistics:
Interrupts
Total number of interrupts.
Unknown
Interrupts that are not counted elsewhere.
Lli
Low-level interface (physical state, primitive sequences).
Proc_rqrd
Frames delivered for embedded N_Port processing.
Timed_out
Frames that have timed out.
Rx_flushed
Frames requiring translation.
Tx_unavail
Frames returned from an unavailable transmitter.
Free_buffer
Free buffer available interrupts.