Reference Guide

Brocade Fabric OS Command Reference 63
53-1004112-02
auditCfg
--show
Displays the current configuration. This operand is optional.
Examples To configure the audit log filter:
switch:admin> auditcfg --class 2,3,8
Audit filter is configured.
To enable audit logging:
switch:admin> auditcfg --enable
Audit filter is enabled.
To display the configuration:
switch:admin> auditcfg --show
Audit filter is enabled.
2-SECURITY
3-CONFIGURATION
8-CLI
Severity level: INFO
To disable audit logging and to display the configuration (the filters are unchanged but show the disabled state):
switch:admin> auditcfg --disable
Audit filter is disabled.
switch:admin> auditcfg --show
Audit filter is disabled.
2-SECURITY
3-CONFIGURATION
8-CLI
Severity level: INFO
SEE ALSO auditDump, rasAdmin