Reference Guide

Brocade Fabric OS Command Reference 853
53-1004112-02
portShow
--lifetime
Displays the entire lifetime statistics for FCIP Tunnels, Circuits and the associated TCP
connections. This option will ignore any time based deltas that were created previously
set using the --reset option.
-p | --perf
Displays additional performance information for the specified FCIP circuit.
--lifetime
Displays the entire lifetime statistics for FCIP Tunnels, Circuits and the associated TCP
connections. This option will ignore any time based deltas that were created previously
set using the --reset option.
-q | --qos
Displays the QoS statistics including performance for each priority. This operand is optional
with the --perf option.
-C | --config
Displays only the configuration information
xtun
Displays FICON and FCP emulation statistics and current runtime conditions for a specified
set of parameters. The following arguments are supported:
-fcp
Displays the SCSI FastWrite/Tape Pipelining command sub-menu when issued with a
VE_Port number. The syntax for -fcp is as follows:
portshow xtun [slot/]\ve_port -fcp [level] [command] [param] [options]
The following optional operands are supported with -fcp to display FCP emulation statistics
and status information:
-help
Displays the command usage. You must specify a VE_Port number to display the help
functions, for example: portshow xtun 7/12 -fcp -help.
level
Specifies the level for which information is displayed. You can specify one or more of
the following levels. With each additional level, this command generates progressively
more information.
-port
Displays data at the port level.
-it
Displays data at the Initiator Target (SID/DID) FCP level.
-itn
Displays data at the Initiator Target nexus (SID/DID) level.
-itl
Displays data at the Initiator Target LUN (SID/DID/LUN) level.
-twb
Displays data at the Exchange (SID/DID/LUN/Exchange) level.