Reference Guide

854 Brocade Fabric OS Command Reference
53-1004112-02
portShow
command
Specifies the type of information to be displayed. This operand is optional; if omitted,
the default (-stats) is used. You can specify more than one command option. Valid
commands include the following:
-stats
Displays FCP emulation statistics. This is the default display.
-info
Displays general FCP emulation information.
-cfg
Displays the FCP emulation configuration.
-dump
Displays a raw data dump including data for all information types.
param
Limits output to one or more of the following parameters, given the commands and
levels specified with this command. This operand is optional; if omitted, output for all
parameters is displayed. There is no default parameter.
-sid SID
Displays output for the specified SID only.
-did DID
Displays output for the specified DID only.
-lun LUN
Displays output for the specified LUN only.
-timer
Displays timer information only.
options
Affects all levels and commands globally. Only one option is supported.
-zero
Displays zero-valued statistics. Note that some commands may show zero-valued
information regardless of whether or not this option is specified.
-ficon
Displays sub-menu for FICON emulation display commands when issued with a VE_Port
number. The syntax for -ficon is as follows:
portshow xtun [slot/]ve_port -ficon [command] [options]
The following optional commands are supported with -ficon; if omitted, the usage for all
parameters is displayed. The xtun -ficon command options include displays for all types of
FICON Emulation.
-help
Displays the command usage. You must specify a VE_Port number to display the help
functions, for example, portshow xtun 7/12 -ficon -help.