Reference Guide

Brocade Fabric OS Command Reference 855
53-1004112-02
portShow
-stats
Displays global FICON Emulation statistics for the tunnel including FICON XRC
Emulation, FICON Tape Write, FICON Tape Read, FICON Teradata Write, and FICON
Teradata Read statistics.
-fdpb adrs
Displays FICON ports or a specific FICON Device Path Block.
-fchb adrs
Displays FICON logical partitions (LPARs) or a specific FICON Channel Control Block.
-fcub adrs
Displays FICON images (the same output as with -images) or a specific FICON
Control Unit Block.
-images
Displays FICON images.
-fdcb adrs
Displays FICON devices or specific FICON Device Control Block.
-tapeperf
Starts the emulated Tape Read and Write performance monitor or displays the
performance statistics.
when you first issue this command or any other performance monitor commands after
a reboot, the command starts the performance monitor, takes a snapshot of current
statistics, and saves them with a time stamp. When you issue the command again, it
displays the time elapsed between the two iterations of the command and the average
time delta statistics. A new time stamp and current statistics are saved as a basis for the
next iteration.
-teraperf
Starts the emulated Teradata performance monitor or displays the performance
statistics.
-printperf
Starts the emulated Printer performance monitor or displays the performance statistics.
-xrcperf
Starts the emulated XRC performance monitor or displays the performance statistics.
-structs
Displays FICON control block sizes.
-emul
Displays comprehensive FICON emulation statistics. Use one of the following options
to display emulation statistics about a specific component.
-emulxrc
Displays FICON XRC emulation statistics.
-emultape
Displays FICON Tape emulation statistics.