Reference Guide

856 Brocade Fabric OS Command Reference
53-1004112-02
portShow
-emultera
Displays FICON Teradata emulation statistics.
-emulprint
Displays FICON Printer emulation statistics.
-act
Displays the current Active Exchange information.
options
The following additional option is supported.
-clear
Resets the specified statistics. This operand is optional; it requires a preceding
command.
-mem adrs length
Specifies the SE memory length in words to display. The valid range for length is 0 to 1024.
-dram2
Display the current usage of the dynamic memory allocator.
-pools
Display the current free pool allocation (FPA) buffer usage.
-tcb
Displays tunnel statistics.
-drshow
Displays the current Descriptor Ring status
-smem
Displays the current Shadow Memory data.
-rte
Displays the current Routing Info SE memory.
--filter filter_args
Filters the portShow output based on the specified filter arguments. The filter arguments
can be specified in any combination or as a conditional statement using the logical AND or
OR operator. A conditional statement can have up to 30 conditions. The following filter
arguments are supported:
-ipaddr ip_address
Filters the output based on the specified IP address.
-port [slot/]port
Filters the output based on the specified port number.
-tcp-port port
Filters the output based on the specified TCP port number.
-dp [slot/]dp#
Filters the output based on the specified dual processor ID.
-retransmits value
Filters the output based on the retransmits exceeding specified value.