Reference Guide

Brocade Fabric OS Command Reference 861
53-1004112-02
portShow
Configured Comm Rates: 2000000 / 5000000 kbps
Peer Comm Rates : 2000000 / 5000000 kbps
Actual Comm Rates : 2000000 / 5000000 kbps
Keepalive (Cfg/Peer) : 1000 (1000 / 1000) ms
Metric : 0
Connection Type : Default
ARL-Type : Reset
PMTU : Disabled
SLA : (none)
Failover Group : 0
VLAN-ID : NONE
L2Cos (FC:h/m/l) : 0 / 0 / 0 (Ctrl:0)
L2Cos (IP:h/m/l) : 0 / 0 / 0
DSCP (FC:h/m/l) : 0 / 0 / 0 (Ctrl:0)
DSCP (IP:h/m/l) : 0 / 0 / 0
cfgmask : 0x40000000 0x00013c2f
Flow Status : 0
ConCount/Duration : 1 / 33m59s
Uptime : 48m53s
Stats Duration : 33m59s
Receiver Stats : 405861508 bytes / 2203591 pkts / 277.52 KBps Avg
Sender Stats : 103974966684 bytes / 13967780 pkts / 71.62 MBps Avg
TCP Bytes In/Out : 1503305492 / 107273625304
ReTx/OOO/SloSt/DupAck: 0 / 0 / 0 / 0
RTT (min/avg/max) : 1 / 1 / 1 ms
Wan Util : 24.1%
To display TCP connections for the circuits on the tunnel:
switch:admin> portshow fciptunnel 8/27 -circuit
Tunnel: VE-Port:8/27 (idx:11, DP1)
====================================================
Oper State : Online
TID : 219
Flags : 0x00000000
IP-Extension : Disabled
Compression : None
QoS BW Ratio : 50% / 30% / 20%
Fastwrite : Enabled
Tape Pipelining : Read/Write
IPSec : Disabled
Load-Level (Cfg/Peer): Failover (Failover / Failover)
Local WWN : 10:00:00:05:33:e7:d2:13
Peer WWN : 10:00:00:05:33:65:a8:05
RemWWN (config) : 00:00:00:00:00:00:00:00
FICON : Enabled
XRC : Enabled
Tape Pipelining : Read/Write
Read Block id : Enabled
Tin Tir : Enabled
DevAck : Enabled
Tera Read : Disabled
Tera Write : Disabled
Print : Disabled
FICON Max Read Pipe : 32
FICON Max Write Pipe : 32
FICON Max Read Devs : 16
FICON Max Write Devs : 16
FICON Write Timer : 300