Reference Guide

Brocade Fabric OS Command Reference 877
53-1004112-02
portShow
Failover Group : 0
VLAN-ID : NONE
L2Cos (f/h/m/l) : 0/0/0/0
DSCP (f/h/m/l) : 0/0/0/0
cfgmask : 0x00003c2f 0x40000000
Flow Status : 1
ConCount/Duration : 0 / 0s
Receiver Stats : 0 bytes / 0 pkts / 0.00 Bps Avg
Sender Stats : 0 bytes / 0 pkts / 0.00 Bps Avg
TCP Bytes In/Out : 0 / 0
ReTx/OOO/SloSt/DupAck: 0 / 0 / 0 / 0
RTT (min/avg/max) : 0 / 0 / 0 ms
Circuit 24.1 (dp:0)
====================================================
Admin/Oper State : Enabled / In Progress
Flags : 0x00000000
IP Addr (L/R) : 192.168.3.20 ge3 - 192.168.3.10
HA IP Addr (L/R) : 192.168.3.21 ge3 - 192.168.3.11
Configured Comm Rates: 2500000 / 5000000 kbps
Peer Comm Rates : 0 / 0 kbps
Actual Comm Rates : 2500000 / 5000000 kbps
Keepalive Timeout : 6000 ms
Metric : 0
Connection Type : Default
ARL-Type : Auto
PMTU : Disabled
Failover Group : 0
VLAN-ID : NONE
L2Cos (f/h/m/l) : 0/0/0/0
DSCP (f/h/m/l) : 0/0/0/0
cfgmask : 0x00003c2f 0x40000000
Flow Status : 1
ConCount/Duration : 0 / 0s
Receiver Stats : 0 bytes / 0 pkts / 0.00 Bps Avg
Sender Stats : 0 bytes / 0 pkts / 0.00 Bps Avg
TCP Bytes In/Out : 0 / 0
ReTx/OOO/SloSt/DupAck: 0 / 0 / 0 / 0
RTT (min/avg/max) : 0 / 0 / 0 ms
To display FCP emulation statistics using the command with two levels and a single command:
switch:admin> portshow xtun 1/13 -fcp -itl -itn -stats
To display FCP emulation statistics, information, and configuration information using the command with a single
level and three commands:
switch:admin> portshow xtun 1/13 -fcp -itl -stats \
-info -cfg
To display FICON statistics on the Brocade SX6 blade:
switch:admin> portshow xtun 8/27 -ficon -stats
FICON FCIP VePort=219 Statistics:
Emulation Common Statistical Counts (decimal)
=============================================
TotalIngressFrames = 307196261