Reference Guide

908 Brocade Fabric OS Command Reference
53-1004112-02
portSwapShow
portSwapShow
Displays the state of the PortSwap feature.
Synopsis portswapshow
Description Use this command to display the state of the PortSwap feature and information about swapped ports. If portSwap
is enabled and ports have been swapped, the command displays the enabled status as well as the swapped ports
and the new port address (the 24-bit PID) for these ports. If portSwap is disabled, the command shows the
disabled status and indicates whether or not swapped ports exist on the switch.
Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric
OS Commands" and "Command Availability" for details.
Operands None
Examples To display a switch with PortSwap enabled and information for swapped ports:
Console message:
2009/10/09-21:22:45, [PSWP-1001], 482, SLOT 6 | FID 51, INFO,
DCX_105_51, PID for port 12/0 and port 12/63 are swapped.
New PID for port 12/0 is 0x697000 and port 12/63 is 0x69e3c0.
switch:admin> portswapshow
PortSwap is enabled
Slot Slotport Swport Address
============================================
12 0 112 0x697000
12 63 895 0x69e3c0
To display the portSwap status on a switch when the feature is disabled and no ports are swapped:
switch:admin> portswapshow
PortSwap is disabled.
Existing Portswap condition is still effective.
Only future Portswap operations are not allowed.
No ports have been swapped
SEE ALSO portSwap, portDisable, portEnable, portShow, portSwap, portSwapDisable, portSwapEnable, switchShow