Reference Guide

928 Brocade Fabric OS Command Reference
53-1004112-02
rasAdmin
rasAdmin
Configures RASlog message generation.
Synopsis rasadmin --enable [-log MSG-ID] [-syslog MSG-ID]
[-module MODULE-ID]
rasadmin --disable [-log MSG-ID] [-syslog MSG-ID]
[-module MODULE-ID]
rasadmin --set -log MSG-ID -severity value
rasadmin --show [-log MSG-ID] [-severity MSG-ID]
[-module MODULE-ID] [-disabled] [-syslog] [-all]
rasadmin --help
Description Use this command to enable or disable RASlog message logging for selected messages or groups of messages
(modules), to change the default severity level for a specified message, and to display configured RASlog settings.
The -log, -module, and -severity configuration and display options apply to external messages (Message ID
1001-4999) and are available to any user with admin privileges.
An INFO RASlog message is generated for every message that is enabled or disabled. In addition, the list of
disabled RASlog messages are collected as part of the supportSave command
The changes made by this command are persistent across reboots, high availability failover, and firmware
downloads.
Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric
OS Commands" and "Command Availability" for details.
This command does not disable messages of type FFDC or AUDIT. When you disable logging for a message that
has both AUDIT and LOG attributes, the message will not be logged as a RASlog message, but it will continue to
be written to the Audit log.
Operands This command has the following operands:
--disable
Disables logging for a specified RASlog message or for all messages grouped in a RASlog
module.
--enable
Enables logging for a specified RASLog message or for all messages grouped in a RASlog
module.Message logging is enabled by default. This command re-enables logging of
messages that were previously disabled.
One of the following options must be specified when you disable or enable message
logging:
-log MSG-ID
Enables or disables logging for the specified message.