Reference Guide

Brocade Fabric OS Command Reference 931
53-1004112-02
rasMan
rasMan
Displays RASlog message text and documentation.
Synopsis rasman message_id
rasman --help
Description Use this command to display documentation for a specified RASlog message. The message is specified by its
message ID. The command output is identical to the documentation provided in the Fabric OS Message
Reference. For each message, the command displays the following information:
MESSAGE
Displays the message text.
MESSAGE TYPE
Displays the message type. The message type can be one or more of the following: LOG,
FFDC, or AUDIT.
CLASS
A class value is displayed for audit messages only. Supported audit classes include
SECURITY, FIRMWARE, FABRIC, LS (logical switch), CLI, MAPS, and RAS.
SEVERITY
Indicates the message severity as one of the following: INFO, ERROR, WARNING,
CRITICAL.
PROBABLE CAUSE
Describes what may be causing the message.
RECOMMENDED ACTION
Describes the recommended action.
Notes This command is available to all supported Brocade roles, including root.
This command displays only external messages in the numeric range of 1000-4999.
The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric
OS Commands" and "Command Availability" for details.
Operands This command has the following operands:
message_id
Specifies the message ID in the following format: <module ID>-<message number>. The
message ID is case sensitive and should be entered exactly as shown in the RASlog
message displayed on the console. For example, ZONE-3018 is a valid message ID, but
zone-3018 is not valid.
--help
Displays the command usage.