Reference Guide

970 Brocade Fabric OS Command Reference

53-1004112-02

secPolicyAbort

Aborts all unsaved changes to the defined database.

Synopsis secpolicyabort

Description Use this command to abort all changes to the defined security database that have not been saved to flash memory

and to abort changes to policy creation and modification operations from all the switches if a fabric-wide

consistency policy is not set for the particular policy.

Notes When an FCS policy is enabled, this command can be issued only from the Primary FCS switch.

Only the user who made the changes to the defined database may use this command to abort them.

The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric

OS Commands" and "Command Availability" for details.

Operands None

Examples To abort all changes that have not been saved to nonvolatile memory:

primaryfcs:admin> secpolicyabort

Unsaved data has been aborted.

primaryfcs:admin> secpolicyabort

No new data to abort.

SEE ALSO secPolicyActivate, secPolicyAdd, secPolicyDelete, secPolicyDump, secPolicyRemove, secPolicySave,

secStatsShow