Users Guide

212 Fabric OS Administrator’s Guide
53-1002920-02
Simple Network Management Protocol
7
• swDeviceStatusTrap
This trap is sent whenever a device logs in or logs out.
The Brocade trap (SW-TRAP) can be configured to send traps using the snmpConfig command.
FICON traps
• linkRNIDDeviceRegistration
A device registered with the switch.
• linkRNIDDeviceDeRegistration
A device de-registered with the switch.
• linkLIRRListenerAdded
A listener for link failure incident is added.
• linkLIRRListenerRemoved
A listener for link failure incident is removed.
• linkRLIRFailureIncident
A link failure incident has occurred.
IF traps
• linkDown
A linkDown trap signifies that the SNMPv2 entity, acting in an agent role has detected that the
ifOperStatus object for one of its communication links is about to transition into the down
state.
• linkUp
A linkUp trap signifies that the SNMPv2 entity, acting in an agent role has detected that the
ifOperStatus object for one of its communication links has transitioned out of the down state."
BD traps
• bdTrap
Traps to be sent for bottleneck detection.
• bdClearTrap
Traps to be sent for bottleneck clearance.
Loading Brocade MIBs
The Brocade MIB is a set of variables that are private extensions to the Internet standard MIB-II.
The Brocade agents support many other Internet-standard MIBs. These standard MIBs are defined
in RFC publications. To find specific MIB information, examine the Brocade proprietary MIB
structure and the standard RFC MIBs supported by Brocade.