Manualshelf

Users Guide

ManualsBrandsDell ManualsComputer equipmentBrocade M5424
71727374757677787980
Fabric OS Administrator’s Guide 75
53-1002920-02
Domain IDs
2
Example of setting the NTP server
switch:admin> tsclockserver
LOCL
switch:admin> tsclockserver "10.1.2.3"
Example of displaying the NTP server
switch:admin> tsclockserver
10.1.2.3
Example of setting up more than one NTP server using a DNS name
switch:admin> tsclockserver "10.1.2.4;10.1.2.5;ntp.localdomain.net"
Updating Clock Server configuration...done.
Updated with the NTP servers
Changes to the clock server value on the principal or primary FCS switch are propagated to all
switches in the fabric.
Domain IDs
Although domain IDs are assigned dynamically when a switch is enabled, you can change them
manually so that you can control the ID number or resolve a domain ID conflict when you merge
fabrics.
If a switch has a domain ID when it is enabled, and that domain ID conflicts with another switch in
the fabric, the conflict is automatically resolved if the other switch’s domain ID is not persistently
set. The process can take several seconds, during which time traffic is delayed. If both switches
have their domain IDs persistently set, one of them needs to have its domain ID changed to a
domain ID not used within the fabric.
The default domain ID for Brocade switches is 1.
Domain ID issues
Keep the following restrictions in mind when working with domain IDs.
• Do not use domain ID 0. Using this domain ID can cause the switch to reboot continuously.
• Avoid changing the domain ID on the FCS switch in secure mode.
• To minimize downtime, change the domain IDs on the other switches in the fabric.
Displaying the domain IDs
Use the following procedure to display device domain IDs:
1. Connect to the switch and log in using an account assigned to the admin role.
2. Enter the fabricShow command.
Example output of fabric information, including the domain ID (D_ID)
The principal switch is determined by the arrow ( > ) next to the name of the switch. In this
output, the principal switch appears in blue boldface.
switch:admin> fabricshow
Switch ID Worldwide Name Enet IP Addr FC IP Addr Name