Users Guide

Fabric OS Command Reference 173
53-1002921-02
creditRecovMode
2
--show
Displays the backend port credit recovery configuration as enabled or disabled. In
addition, the output indicates whether link reset mode or link reset threshold mode
is configured.
--help
Displays the command usage.
EXAMPLES To enable backend port credit loss recovery with the link reset only option and to display the
configuration:
switch:admin> creditrecovmode --cfg onLrOnly
switch:admin> creditrecovmode --show
Internal port credit recovery is Enabled with LrOnly
C2 FE Complete Credit Loss Detection is Enabled
To enable backend port credit loss recovery with the link reset threshold option and to display the
configuration:
switch:admin> creditrecovmode --cfg onLrThresh
switch:admin> creditrecovmode --show
Internal port credit loss recovery is Enabled with LrThresh
C2 FE Complete Credit Loss Detection is Enabled
To disable backend port credit loss recovery and to display the configuration:
switch:admin> creditrecovmode --cfg off
switch:admin> creditrecovmode --show
Internal port credit loss recovery is Disabled
C2 FE Complete Credit Loss Detection is Enabled
To disable credit loss detection on Condor 2 front-end ports:
switch:admin> creditrecovmode --fe_crdloss off
switch:admin> creditrecovmode --show
Internal port credit loss recovery is Disabled
C2 FE Complete Credit Loss Detection is Disabled
To examine a backend port for credit loss:
switch:admin> creditrecovmode --cfg off
switch:admin> creditrecovmode --check 2/32,1
Started Credit loss Detection on slot 2 port 32 VC 1.
Please wait....
Detected credit loss.
Link Reset performed.
SEE ALSO bottleneckMon