Users Guide

404 Fabric OS Command Reference
53-1002921-02
flow
2
-disable_wrap
Disables the wrapping of mirrored frame logs. The Flow Mirror flow must be
deactivated before using this command. The statistics of the Flow Mirror flow are
reset during this operation.
EXAMPLES To change the device addressing mode to WWN:
switch:admin> flow --control -deviceidmode wwn
To change the port addressing mode to index:
switch:admin> flow --control -portidmode index
To configure the ports from 1 to 40 in slot 1 as SIM port:
switch:admin> flow --control -simport 1/1-40 -enable
To remove the SIM port configuration on port 20 in slot 1:
switch:admin> flow --control -simport 1/20 -disable
To modify the size and pattern for a flow:
switch:admin> flow --control myflow2 -feature generator
-size 100 -pattern "1234"
To disable wrapping of frame logs for the Flow Mirror feature:
switch:admin> flow --control -feature mirror -disable_wrap
FUNCTION Clearing feature data
SYNOPSIS flow --reset flow_name -feature feature_list
DESCRIPTION Use this command to clear the data of the specified flow and feature combination. All the data collected
for the flow and feature combination will be cleared.
OPERANDS The --reset command has the following operands:
flow_name
Specifies the name of the flow on which the feature data must be cleared. Specify
"all" to reset all flows.
feature_list
Specifies a comma-separated list of features. Specify "all" to reset all features for
a flow. Valid values for feature_list include the following: monitor, generator, and
mirror.
EXAMPLES To clear all the mirrored frames for a flow:
switch:admin> flow --reset myflow1 -feature mirror
FUNCTION Displaying flow data
SYNOPSIS flow --show [flow_name] [-feature feature_list]
[port_options frame_options]
[-count iterations | -time interval | -verbose]
[-sortby field] [-ctrlcfg]