Users Guide

Fabric OS Command Reference 563

53-1002921-02

mapsConfig

Enables MAPS and sets other MAPS configurations.

SYNOPSIS mapsconfig --enablemaps -policy policy_name

mapsconfig --fwconvert

mapsconfig --config pause -type member_type

-members member_list

mapsconfig --config continue -type member_type

-members member_list

mapsconfig --actions actions_list

mapsconfig --emailcfg -address email_address

mapsconfig --import flow_name [-force]

mapsconfig --deimport flow_name

mapsconfig --purge

mapsconfig --show

mapsconfig --help

DESCRIPTION Use this command to perform the following Monitoring and Alerting Policy Suite (MAPS) functions:

• Enable MAPS monitoring. This operation will disable Fabric Watch monitoring.

• Convert Fabric Watch configuration to MAPS policies.

• Pause or continue monitoring specific elements.

• Define the list of allowable actions that can be taken on the switch when a threshold is triggered.

• Configure e-mail address to which the alerts must be delivered.

• Import a flow.

• Remove the imported flow from MAPS configuration.

• Delete all user-defined MAPS configurations: rules, groups, policies, etc.

• Display MAPS settings.

NOTES This command requires a Fabric Vision license.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in

place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for

details.