Users Guide

ManualsBrandsDell ManualsComputer equipmentBrocade M5424

731

732

733

734

735

736

737

738

739

740

Fabric OS Command Reference 701

53-1002921-02

portCfg

To set the failover group for circuit 1 and verify the configuration:

switch:admin> portcfg fcipcircuit 1/12 modify 1 -g 1

Operation succeeded

switch:admin> portshow fciptunnel all -c

-----------------------------------------------------------------------------

Tunnel Circuit OpStatus Flags Uptime TxMBps RxMBps ConnCnt CommRt Met/G

-----------------------------------------------------------------------------

1/22 - Up cft---- 26m51s 0.00 0.00 1 - -/-

1/22 0 1/xge0 Up ---4--s 20m26s 0.00 0.00 1 3000/5000 0/-

1/22 1 1/xge0 Up ---4--s 3s 0.00 0.00 2 3000/5000 0/1

1/22 2 1/xge0 Up ---4--s 2m7s 0.00 0.00 1 5000/5000 1/1

-----------------------------------------------------------------------------

To delete circuit 1:

switch:admin> portcfg fcipcircuit 1/12 delete 1

Operation succeeded

To create a tunnel with VLAN tagging:

1. Create a tunnel with VLAN tagging set.

switch:admin> portcfg fciptunnel 16 create \

192.168.2.20 192.168.2.10 2500000 -v 100

Operation Succeeded

2. Create a circuit with VLAN tagging set.

switch:admin> portcfg fcipcircuit 16 create 1 \

192.168.2.21 192.168.2.11 2500000 -v 200

Operation Succeeded

3. Modify an existing circuit to change the VLAN tag and L2 CoS levels.

switch:admin> portcfg fcipcircuit 16 modify \

0 -v 300 --l2cos-f 7 --l2cos-h 5 \

--l2cos-m 3 --l2cos-l 1

!!!! WARNING !!!!

Modify operation can disrupt the traffic on the

fcipcircuit specified for a brief period of time. This

operation will bring the existing circuit down

(if circuit is up) before applying new configuration.

Continue with Modification (Y,y,N,n): [ n] y

Operation Succeeded

4. Modify existing circuit to change DSCP marking values

switch:admin> portcfg fcipcircuit 16 modify 0 \

--dscp-f 32 --dscp-h 16 --dscp-m 8 --dscp-l 4

Operation Succeeded

5. Display the tunnel configuration and circuit values.

switch:admin> portshow fciptunnel 16 -c

-------------------------------------------

Tunnel ID: 16

Tunnel Description:

Admin Status: Enabled

Oper Status: In Progress

Compression: Off