Users Guide

Fabric OS Message Reference 905
53-1002929-01
XTUN-1006
5
XTUN-1006
Message FCIP FC frame drop due to transmit timeout on slot=<FX8-24 Slot number (or 0 if
7800)> DP=<FX8-24 DP number (or 0 if 7800)> BLS=<Blaster Image Number (0 or 1)>
DR=<FC Descriptor Ring Number> Frames Dropped=<Number of FC frames that were
dropped>.
Message Type LOG
Severity ERROR
Probable Cause Indicates that a Fibre Channel (FC) Send frame timeout occurred and the frames were dropped from the
SW queue.
Recommended
Action
This error indicates that there is a slow draining device or a hung Blaster TX Descriptor Ring.
XTUN-1007
Message FCIP FC frame drop due to truncated receive on slot=<FX8-24 Slot number (or 0 if
7800)> DP=<FX8-24 DP number (or 0 if 7800)> BLS=<Blaster Image Number (0 or 1)>
DR=<FC Descriptor Ring Number> Frames Dropped=<Number of FC frames that were
dropped>.
Message Type LOG
Severity ERROR
Probable Cause Indicates that a Fibre Channel (FC) Received frame event was posted, but the frame was dropped due to
an invalid receive length. This error occurs only on faulty hardware.
Recommended
Action
Contact your vendor's customer support for assistance.
XTUN-1008
Message FCIP Control block memory usage slot=<FX8-24 Slot number (or 0 if 7800)>
DP=<FX8-24 DP number (or 0 if 7800)> Allocated=<The total allocated bytes from the
pool> Free=<The total free bytes remaining in the pool> Total=<The total size of
the pool>.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the control block memory pool has crossed the usage threshold. This message is
generated when a significant amount of control block memory has been allocated from the free pool. This
memory is limited and you should monitor for events that indicate that greater than 80 percent of the pool
has been allocated.
Recommended
Action
Contact your vendor's customer support for assistance.