Deployment Guide

412 Fabric OS Message Reference

53-1003140-01

FICN-1006

Message FICON GEPort <GE port number> TID <Tunnel number> Feature Change failed Xrc <1 or

0 - XRC Emulation Enabled or Disabled> TapeWrt <1 or 0 - Tape Write Emulation

Enabled or Disabled> TapeRd <1 or 0 - FICON Tape Read Emulation Enabled or

Disabled> TinTir <1 or 0 - FICON TIN/TIR Emulation Enabled or Disabled> DvcAck <1

or 0 - FICON Device Level Ack Emulation Enabled or Disabled> RdBlkId <1 or 0 -

FICON Write Emulation Read Block ID Emulation Enabled or Disabled>.

Message Type LOG

Severity WARNING

Probable Cause Indicates that the feature change has failed because the FCIP tunnel ID associated with the FICON

tunnel is still active.

Recommended

Action

Disable the applicable FCIP tunnel to make the feature change effective.

FICN-1007

Message DevDiskEgr:FICON Selective Reset:Path=0x<VEPortNumber HostDomain HostPort

DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> State=0x<Current Emulation

State> stat_array=0x<the Last 4 Status values that were received from the device>.

Message Type LOG

Severity ERROR

Probable Cause Indicates a Selective Reset from the channel was received as either a normal part of path recovery or the

starting sequence in an error case.

Recommended

Action

If there was a job failure associated with this event, contact your vendor's customer support.

FICN-1008

Message DevDiskEgr:FICON Purge Path received Path=0x<VEPortNumber HostDomain HostPort

DeviceDomcontactain><DevicePort LPAR CUADDR DeviceAddr>.

Message Type LOG

Severity ERROR

Probable Cause Indicates a FICON Purge Path was received from the channel as a part of path recovery.

Recommended

Action

If there was a job failure associated with this event, contact your vendor's customer support for

assistance.