Deployment Guide

Fabric OS Message Reference 781
53-1003140-01
SEC-1119
5
SEC-1119
Message Secure mode has been enabled.
Message Type LOG
Severity INFO
Probable Cause Indicates the secure Fabric OS was enabled by the secModeEnable command.
Recommended
Action
Verify the security event was planned. If the security event was planned, there is no action required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
SEC-1121
Message Time is out of range when <text>.
Message Type LOG
Severity ERROR
Probable Cause Indicates the time on the switch is not synchronized with the primary fabric configuration server (FCS),
the data packet is corrupted, or a replay attack is launched on the switch.
Recommended
Action
Verify the security event was planned. If the security event was planned, verify that all switches in the
fabric are in time synchronization with the primary FCS and that no external entity is trying to access the
fabric. When verification is complete, retry the operation.
SEC-1122
Message Error code: <Domain ID>, <Error message>.
Message Type LOG
Severity INFO
Probable Cause Indicates that one of the switches in the fabric could not communicate with the primary fabric
configuration server (FCS).
Recommended
Action
Run the fabricShow command to verify that all switches in the fabric are in the ready state. When all
switches are in the ready state, retry the operation.