Deployment Guide

802 Fabric OS Message Reference
53-1003140-01
SEC-1303
5
SEC-1303
Message This software version does not support security.
Message Type LOG
Severity INFO
Probable Cause Indicates the currently installed software version does not support the Brocade Secure Fabric OS
feature.
Recommended
Action
Run the firmwareDownload command to update the firmware to the latest version for your specific
switch. Verify the firmware you are installing supports the Brocade Secure Fabric OS feature.
SEC-1304
Message This switch has no security license.
Message Type LOG
Severity INFO
Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when
the primary fabric configuration server (FCS) distributes the security database to the other switches in
the fabric, and then local validation finds the error in the security database. This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify the fabric is still consistent. All the switches should be in the
ready state. If a switch is in the error state, the database may not be correctly updated for that specific
switch.
SEC-1305
Message This switch has no zoning license.
Message Type LOG
Severity INFO
Probable Cause Indicates a corruption occurred during the distribution of the security database. This can only occur when
the primary fabric configuration server (FCS) distributes the security database to the other switches in
the fabric, and the local validation finds the error in the security database. This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify the fabric is still consistent. All the switches should be in the
ready state. If a switch is in the error state, the database may not be correctly updated for that specific
switch.