Deployment Guide

822 Fabric OS Message Reference
53-1003140-01
SEC-3018
5
SEC-3018
Message Event: <Event Name>, Status: success, Info: Parameter [<Parameter Name>] changed
from [<Old Value>] to [<New Value>].
Message Type AUDIT
Class SECURITY
Severity INFO
Probable Cause Indicates the specified password configuration parameter is changed.
Recommended
Action
Verify the password configuration parameter was intentionally changed. If the password configuration
parameter was intentionally changed, no action is required. If the password configuration parameter was
not intentionally changed, take appropriate action as defined by your enterprise security policy.
SEC-3019
Message Event: <Event Name>, Status: success, Info: Passwdcfg parameters set to default
values.
Message Type AUDIT
Class SECURITY
Severity INFO
Probable Cause Indicates the password configuration parameters are set to default values.
Recommended
Action
Verify the password configuration parameter was intentionally set to default values. If the password
configuration parameter was intentionally set to default values, no action is required. If the password
configuration parameter was not intentionally set to default values, take appropriate action as defined by
your enterprise security policy.
SEC-3020
Message Event: <Event Name>, Status: success, Info: Successful login attempt via
<connection method and IP Address>.
Message Type AUDIT
Class SECURITY
Severity INFO
Probable Cause Indicates a successful login occurred. An IP address is displayed when the login occurs over a remote
connection.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.