Documentation Updates

Fabric OS Documentation Updates 9
53-1003064-02
Chapter
1
Access Gateway Administrator’s Guide
In this chapter
•Documentation updates for Fabric OS v7.2.0 and later . . . . . . . . . . . . . . . . . 9
Documentation updates for Fabric OS v7.2.0 and later
The updates in this section are for the Fabric OS FCIP Administrator’s Guide, publication number
53-1002919-01, published July 2013.
About This Document
The following paragraph has been modified:
All Fabric OS switches must be running Fabric OS v6.1.0 or later; all M-EOS switches must be
running M-EOSc 9.1 or later, and M-EOSn must be running 9.6.2 or later. Cisco switches must
support standards-based NPIV.
Chapter 1, Access Gateway Basic Concepts
Under “Brocade Access Gateway overview”, the following paragraph has been modified: Access
Gateway is compatible with M-EOS v9.1 or v9.6 or later, and Cisco-based fabrics that support
standards-based NPIV. You can use the command line interface (CLI), Web Tools, or Brocade
Network Advisor (BNA) to enable and disable AG mode and configure AG features on a switch. This
document describes configurations using the CLI commands. Refer to the Fabric OS Command
Reference Manual, the Web Tools Administrator’s Guide, or the Brocade Network Advisor User
Guide for more information about AG support in those tools.
Chapter 3, Managing Policies and Features in Access Gateway Mode
Under “Considerations for the Brocade 6505 and 6510”:
The Brocade 6505 and 6510 switches are shipped in Fabric OS Native mode, but can function in
either Fabric OS Native mode or Brocade Access Gateway mode. They are also supported in Access
Gateway cascaded configurations. All ports on demand (POD) licenses must be present to support
Access Gateway.