Messages Reference Guide

Fabric OS Message Reference 125
53-1002749-01
AG-1012
5
AG-1012
Message Sending logout (LOGO) request failed on N_Port <port number>.
Message Type LOG
Severity WARNING
Probable Cause Indicates that there was a failure sending an N_Port logout request from the Access Gateway to the
fabric switch.
Recommended
Action
Check the configuration of the fabric switch connected to the Access Gateway.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
AG-1013
Message F_Ports mapped to N_Port <port number> failed over to other N_Port(s).
Message Type LOG
Severity INFO
Probable Cause Indicates that the specified N_Port is failing over to other N_Ports connected to the same fabric.
Recommended
Action
Execute the ag --mapshow command to display updated F_Port-to-N_Port mapping.
AG-1014
Message Failing back F_Ports mapped to N_Port <port number>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the specified N_Port is failing back F_Ports mapped to it.
Recommended
Action
Execute the ag --mapshow command to display updated F_Port-to-N_Port mapping.