Messages Reference Guide

388 Fabric OS Message Reference

53-1002749-01

FICN-1045

Message HostTapeIng:FICON Purge received:Path=0x<VEPortNumber HostDomain HostPort

DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>.

Message Type LOG

Severity WARNING

Probable Cause Indicates a Purge Path was received from the locally connected FICON channel. This is performed

during the path recovery.

Recommended

Action

If this was an unexpected event, contact your vendor's customer support for assistance.

FICN-1046

Message HostTapeIng:LRJ received on Path=0x<VEPortNumber HostDomain HostPort

DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> lastCmds=0x<Last 4 commands

received from the channel for this device> lastStatus=0x<Last 4 status values

presented to the channel for this device> treating as system reset event.

Message Type LOG

Severity WARNING

Probable Cause Indicates that a Link Level Reject (LRJ) from a FICON channel indicates that the channel no longer has a

path established to the Control Unit.

Recommended

Action

This is normally an unexpected event; contact your vendor's customer support for assistance.

FICN-1047

Message fcFicSetEmulation:Path=0x<VEPortNumber HostDomain HostPort

DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> FDCB Not Idle state=0x<Current

emulation state of the FICON device> prevState=0x<Previous emulation state of the

FICON device> set to state=0x<The new state to which the device is transitioning>.

Message Type LOG

Severity ERROR

Probable Cause Indicates there is an internal emulation error. This message should not be encountered.

Recommended

Action

This is an unexpected event; contact your vendor's customer support for assistance.