Messages Reference Guide

Fabric OS Message Reference 407
53-1002749-01
FICN-1100
5
FICN-1100
Message HostTeraIng:FICON Selective Reset:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> Elapsed Time=<the number of
seconds since the last IO started for this device>.<the number of milliseconds
since the last IO started for this device> seconds.
Message Type LOG
Severity ERROR
Probable Cause Indicates that protocol errors in emulation in the Control Unit or network errors can cause Selective
Reset.
Recommended
Action
If this was an unexpected event, contact your vendor's customer support for assistance.
FICN-1101
Message HostTeraIng:FICON Purge received:Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>.
Message Type LOG
Severity WARNING
Probable Cause Indicates a Purge Path was received from the locally connected FICON channel. This is performed
during the path recovery.
Recommended
Action
If this was an unexpected event, contact your vendor's customer support for assistance.
FICN-1102
Message HostTeraIng:LRJ received on Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> lastCmds=0x<Last 4 commands
received from the channel for this device> lastStatus=0x<Last 4 status values
presented to the channel for this device> treating as system reset event.
Message Type LOG
Severity WARNING
Probable Cause Indicates a Link Level Reject (LRJ) from a FICON channel indicates that the channel believes that it no
longer has a path established to the Control Unit.
Recommended
Action
This is normally an unexpected event; contact your vendor's customer support for assistance.