Messages Reference Guide

Fabric OS Message Reference 731
53-1002749-01
SEC-1183
5
Recommended
Action
No action is required.
SEC-1183
Message Policy to binary conversion error: Port <port number> is out range.
Message Type LOG
Severity ERROR
Probable Cause Indicates a security database conversion has failed because of an invalid value.
Recommended
Action
Retry the command with a valid value.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
SEC-1184
Message <Security server (RADIUS/LDAP/TACACS+)> configuration change, action <action>,
server ID <server name>.
Message Type LOG
Severity INFO
Probable Cause Indicates the specified action is applied to the specified remote authentication dial-in user service
(RADIUS/LDAP/TACACS+) server configuration. The possible actions are ADD, REMOVE, CHANGE,
and MOVE.
Recommended
Action
No action is required.
SEC-1185
Message <action> switch DB.
Message Type LOG
Severity INFO
Probable Cause Indicates the switch database was enabled or disabled as the secondary authentication, accounting, and
authorization (AAA) mechanism when the remote authentication dial-in user service
(RADIUS/LDAP/TACACS+) is the primary AAA mechanism.
Recommended
Action
No action is required.