Messages Reference Guide

890 Fabric OS Message Reference
53-1002749-01
ZEUS-1004
5
ZEUS-1004
Message S<slot number>,C<chip index>: Invalid DMA ch pointer, chan:<Channel number>,
good_addr:0x<Good address> bad_addr:0x<Bad address>.
Message Type LOG
Severity ERROR
Probable Cause Indicates an internal error in the application-specific integrated circuit (ASIC) hardware that may degrade
the data traffic.
Recommended
Action
Reboot the system at the next maintenance window. If the problem persists, replace the blade.
ZEUS-1005
Message S<slot number>,C<chip index>,A<zeus id>: Memory allocation failed.
Message Type LOG
Severity ERROR
Probable Cause Indicates a memory allocation failure in the software.
Recommended
Action
Restart the system at the next maintenance window. If the problem persists, replace the control
processor (CP) blade.
ZEUS-1015
Message Port re-initialized due to Link Reset failure on internal Port S<slot
number>,P<port number>(<blade port number>).
Message Type LOG
Severity WARNING
Probable Cause Indicates that the port was re-initialized due to link reset failure.
Recommended
Action
When this error is observed persistently, power cycle the specified blade using the slotPowerOff and
slotPowerOn commands. If the problem persists, replace the blade.