Messages Reference Guide

Fabric OS Message Reference 893
53-1002749-01
ZONE-1007
5
Recommended
Action
No action is required.
ZONE-1007
Message Ioctl (<function>) in (<error message>) at port (<port number>) returns code
(<error string>) and reason string (<reason string>).
Message Type LOG
Severity INFO
Probable Cause Indicates that frame filter logic reported a failure during the specified I/O Control (IOCTL) call. This is
usually a programming error when adding CAM entries before the filter setup.
Recommended
Action
Avoid this problem in the following ways:
• Avoid having too many hosts zoned with a set of target devices at a single port.
• Avoid having too many zones directed at a single port group on the switch.
ZONE-1010
Message Duplicate entries in zone (<zone name>) specification.
Message Type LOG
Severity WARNING
Probable Cause Indicates that there are duplicate entries in the specified zone object. This message occurs only when
enabling a zone configuration.
Recommended
Action
Check the members of the zone using the cfgShow command. Delete the duplicate member using the
zoneRemove command.
ZONE-1013
Message QuickLoop not supported.
Message Type LOG
Severity WARNING
Probable Cause Indicates that the QuickLoop feature is not supported in the current version of Fabric OS. QuickLoop
zones are not supported in Fabric OS version 4.x or later. Even if the QuickLoop zoning configuration is
enabled on the switch, it will not be supported.
Recommended
Action
Edit the zone database to remove the QuickLoop zoning definition in the effective configuration.