Messages Reference Guide

Fabric OS Message Reference 895
53-1002749-01
ZONE-1022
5
ZONE-1022
Message The effective configuration has changed to <Effective configuration name>. <AD
Id>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the effective zone configuration has changed to the specified zone name.
Recommended
Action
Verify that the event was planned. If the event was planned, no action is required. If the event was not
planned, take appropriate action as defined by your enterprise security policy.
ZONE-1023
Message Switch connected to port (<port number>) is busy. Retrying zone merge.
Message Type LOG
Severity INFO
Probable Cause Indicates that the switch is retrying the merge operation. This usually occurs if the switch on the other
side of the port is busy.
Recommended
Action
If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
ZONE-1024
Message <Information message>.
Message Type LOG
Severity INFO
Probable Cause Indicates that the cfgSave command has completed successfully.
Recommended
Action
No action is required.