Release Notes

Open Defects in Fabric OS v7.2.0
Fabric OS v7.2.0a Release Notes v1.0 Page 53 of 93
Defect ID:
DEFECT000466750
Technical Severity:
Medium
Summary:
In Switch Events and Switch information tab, the last updated time shows the Host time instead of
showing the Switch time.
Symptom:
Misleading last updated time in Switch Events and Switch Information tab.
Feature:
WebMgmt
Function:
Switch Explorer/Switch View
Reported In Release:
FOS7.2.0
Probability:
Low
Defect ID:
DEFECT000467204
Technical Severity:
Medium
Summary:
CMM Restore default does not clear snmpv3 user entries
Symptom:
Restoring defaults does not clear snmpv3 users while triggering from CMM.
Workaround:
Manually update from the CLI
Feature:
Mgmt Embedded - SNMP
Function:
Other
Reported In Release:
FOS7.0.0_pha
Probability:
Low
Defect ID:
DEFECT000467760
Technical Severity:
Medium
Summary:
Disabled port is not getting enabled after binding a port address.
Symptom:
Port is disabled after binding a port address.
Workaround:
Manually enable the port using port enable option from port admin.
Feature:
WebMgmt
Function:
Ports Admin
Reported In Release:
FOS7.2.0
Probability:
Low
Defect ID:
DEFECT000467965
Technical Severity:
Medium
Summary:
A seed switch running lower FOS version does not reliably show correct fabric view status for
MAPS-enabled switches
Symptom:
If running a WebTools seed switch with a lower version than v7.2.0, some switches running MAPS in
the fabric will display as "blue" and Unknown status whereas some will display normal, expected
status.
Feature:
Mgmt Embedded - HTTP
Function:
Other
Reported In Release:
FOS7.2.0
Probability:
Medium
Defect ID:
DEFECT000468562
Technical Severity:
Medium
Summary:
Portperfshow -x displays 0 for throughput data on chassis that has traffic
Symptom:
Portperfshow -x displays 0 for traffic throughput on chassis while Portperfshow shows traffic running
Feature:
8G Platform Services
Function:
FOS Kernel Drivers
Reported In Release:
FOS7.2.0
Probability:
Medium
Defect ID:
DEFECT000468777
Technical Severity:
Medium
Summary:
portcfgpersistentdisable -r does not persist the reason on reboot of a 7800
Symptom:
port reason does not persist across a reboot on a 7800 switch when portcfgpersistentdisable -r is
configured
Feature:
8G Platform Services
Function:
Other
Reported In Release:
FOS7.2.0
Probability:
Medium